XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
Transmission Speed Sensor: Service and Repair
Input Speed Sensor
Removal
1. Open the driver's door, or both doors if necessary, to allow the side glass to drop. Ensure that the doors remain open until after the battery has been
disconnected.
2. Disconnect battery ground cable.
Remove the battery cover.
3. WARNING: TRANSMISSION FLUID MAY CAUSE SEVERE BURNS, ENSURE THAT ALL SAFETY PROCEDURES ARE OBSERVED.
Raise the vehicle on a lift.
Carefully remove the drain plug and drain the transmission fluid.
4. Remove the twenty-two bolts which secure the fluid pan.
Remove the fluid pan and all traces of gasket material.