XK (X100) V8-4.2L (2005)
/v8-4.2l/Page-530002.png)
13. Slacken and remove screws securing lift motor to door.
14. Lower motor/regulator assembly into bottom of door and close scissor mechanism.
15. Turning it to achieve clearance, withdraw motor/regulator assembly through door aperture.
16. Place assembly on bench, slacken and remove screws securing lift motor to regulator and remove motor.
Installation
1. Position lift motor on regulator assembly and fit and tighten securing screws.
2. Close scissor mechanism and pass assembly through aperture into door.
3. Position motor/regulator assembly in door.
4. Fit but do not tighten motor to door securing screws and regulator channel securing nut.
