XK (X100) V8-4.2L (2005)
/v8-4.2l/Page-568002.png)
Installation
1. Position veneer panel on console.
2. Fit and fully seat oddments tray.
3. On convertible model, connect roof switch harness multiplug.
4. Route Sport mode and Cruise Control switches through panel aperture.
5. Fully seat veneer panel on console.
6. Position veneer panel clamp plates and fit and tighten securing screws.
7. Position gear selector surround finisher.
8. Fit and fully seat Sport mode and Cruise Control switches in finisher.
9. Finally fit gear selector surround finisher.
10. Move gear selector to position P.
11. Connect ground cable to battery terminal and fit battery cover.
