XK (X100) V8-4.2L (2005)
/v8-4.2l/Page-574008.png)
15. Position the outer tension cords to the frame and secure with pop rivets.
16. Manually move top to fully raised position.
17. Align rear of headlining, pierce it through existing holes at riveting points in the retaining brackets and pop rivet headlining to retaining brackets.
18. Secure headlining at pull-down handle aperture.
-
Remove backing from Velcro strips and position and firmly seat at pull-down handle aperture.
-
Feed headlining trim material through frame to pull-down handle aperture and secure on Velcro strips.
19. Fit and fully seat new fir tree fasteners securing headlining to frame.
20. Remove backing from double-sided tape on front of headlining and position and firmly seat lining on frame.
