jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Engine Controls - Engine Pinging at 70 MPH Cruise|Page 1872 > < A/T, Engine Controls - Harsh A/T Shifts|Page 1867
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - Engine Pinging at 70 MPH Cruise

303-69

DATE
06/05

XK

MODEL
2003 MY-ON
XKR only

VIN
A30645-ON

Engine Detonation Pinging During
Acceleration From Steady-State Driving -
Reconfigure ECM

Issue:

Some 2003 MY-on XKR vehicles may exhibit engine detonation (pinging) when accelerating from steady-state driving, typically at 70 mph (112 km/h).
The issue can occur with light, medium or heavy throttle applications.

Action:

In case of a verified complaint of the above condition on a 2003 MY-on XKR vehicle, reconfigure the ECM to overcome the detonation concern. Follow
the Service Instruction outlined below.

Note:

Ensure WDS is loaded with software release JTP 759/38 or later.

1.

Position Worldwide Diagnostic System (WDS) alongside vehicle, switch Portable Test Unit (PTU) "ON" and allow software to load.

2.

Connect PTU to vehicle using diagnostic cable.

3.

Navigate to configuration main menu.

4.

Select and run "re-configure existing ECM" application.

5.

After successful completion, switch "OFF" PTU, disconnect from vehicle and return WDS to original location.

Parts Information:

Warranty Information:

Warranty claims should be submitted quoting the information found in the table.

This will result in payment of the stated time and, where applicable parts/miscellaneous expense codes as listed.

Engine Controls - Engine Pinging at 70 MPH Cruise|Page 1872 > < A/T, Engine Controls - Harsh A/T Shifts|Page 1867