XK (X100) V8-4.2L SC (2003)
EM
Engine Management
FC
Fascia
FL
LH Front Wheel
FR
RH Front Wheel
IC
In-Car Entertainment
IS
Inclination Sensor Link
LF
Left Forward
LL
Power Steering Link
PI
Engine
QL
Convertible LH Quarter Light Link
QR
Convertible RH Quarter Light Link
RF
Roof
RH
Rearward
RL
LH Rear Wheel
RR
RH Rear Wheel
RT
Radio Telephone
SA
Starter to Generator Link
SC
Column Switchgear
SD
Seat, Driver
SP
Seat, Passenger
SW
Steering Wheel
TL
Telephone
Wiring Color Codes
N
Brown
B
Black
W
White
K
Pink
G
Green
R
Red
Y
Yellow
O
Orange
S
Slate
L
Light
U
Blue
P
Purple
BRD
Braid
When a wire has two color code letters, the first letter indicates the main color and the subsequent letter indicates the tracer color.
Code Numbering
When numbering connectors, grounds and splices, Jaguar Engineering uses a three-position format: AC001, AC002, etc. Because space is limited in this
Electrical Guide, the codes have been shortened. Thus AC001-001 becomes AC1-1, AC002-001 becomes AC2-1, etc.
Connectors
HARNESS CODE + CONNECTOR NUMBER + PIN NUMBER; for example: FC7-24 (pin number is separated by a dash)
Where the pin number differs from LHD to RHD, the connector number will be further identified by (LHD) or (RHD).
Part 1
Splices
HARNESS CODE + S (SPLICE) + SPLICE NUMBER; for example: RHS3 (no dash is used)