XK (X100) V8-4.2L SC (2003)
/v8-4.2l_sc/Page-576004.png)
2. Tighten nuts.
7. Tighten subframe bolts shown.
8. Position spacer into the recess of each subframe bush.
9. Locate subframe bushes onto the tapered body locations.
-
Raise jack.
10. Fit suspension subframe mounting-brackets.
1. Position bracket to subframe.
2. Fit bush center bolt, DO NOT tighten bolt at this stage.
3. Fit bolts securing bracket to body, DO NOT tighten bolts at this stage.
-
Repeat procedure on opposite-side mounting bracket.
11. Tighten bolts securing mounting brackets to body.
-
Repeat procedure on opposite-side mounting bracket.
