XK (X100) V8-4.2L SC (2003)
/v8-4.2l_sc/Page-925004.png)
10. Connect switched 12 volt supply to rear quarter glass motor harness multiplug.
11. Carefully motor rear quarter glass up to just contact top seal.
12. Carefully close adjacent door ensuring glass does not contact rear quarter glass.
13. Slacken lower adjuster locknut.
14. Move rear quarter glass to achieve a parallel 15 mm gap between front edge of rear quarter glass frame and rear edge of door glass.
15. Tighten lower adjuster locknut.
16. Slacken upper adjuster locknut.
17. Turn upper adjuster to achieve lateral alignment of rear quarter glass upper edge with top seal.
18. Tighten upper adjuster locknut.
