XK (X100) V8-4.2L SC (2003)
/v8-4.2l_sc/Page-930001.png)
Back Window Glass Moulding / Trim: Service and Repair
Rear Window Moulding - Vehicles Without: Convertible Top
Removal
1. Using masking tape, mark finisher centre points on BIW.
2. Carefully release backlight finishers from retaining clips.
3. Clean mating surface of backlight.
4. If original finisher is to be re-fitted, clean mating surface.
Installation
1. Aligning centre points with masking tape markers, position finisher on backlight and press firmly to fully seat on retaining clips.
