XK (X150) V8-4.2L (2008)
Alarm Horn: Service and Repair
Anti-Theft Alarm Horn (86.52.03)
Removal
1. Make the pedestrian protection system safe.
2. Remove the air intake cover.
-
Remove the 3 clips.
3. Release the pedestrian protection actuator bracket.
-
Release the 3 wiring harness clips.
-
Remove the 4 bolts.
4. Remove the pedestrian protection actuator and bracket.
-
Disconnect the electrical connector.
5. Remove the anti-theft alarm horn.
-
Loosen but do not remove the 2 nuts.
-
Disconnect the electrical connector.
Installation
1. Install the anti-theft alarm horn.
-
Connect the electrical connector.
-
Tighten the nuts to 10 Nm (7 lb.ft).
2. Install the pedestrian protection actuator and bracket.
-
Connect the electrical connector.
3. Secure the pedestrian protection actuator bracket.
-
Attach the wiring harness clips.
-
Tighten the bolts to 8 Nm (6 lb.ft).
4. Install the air intake cover.
-
Install the 3 clips.