XK (X150) V8-4.2L (2008)
Navigation Display: Service and Repair
Navigation System Display Module (86.62.07)
Removal
1. Disconnect the battery ground cable.
2. Remove the instrument panel center reinforcement trim panel.
-
Release from the 5 clips.
3. Release the navigation system module bracket.
-
Remove the 4 Torx screws.
-
Disconnect the 10 electrical connectors.
-
Release the assembly.
CAUTION: Protect the surrounding trim from damage when changing the component.
4. Remove the navigation screen module.
-
Remove the trim panel veneer upper retaining clip.
-
Remove the 2 Torx screws.
-
Remove the 4 Torx bolts.
NOTE: Do not disassemble further if the component is removed for access only.