XK (X150) V8-4.2L (2008)
Trim Panel: Service and Repair
Rear Quarter Trim Panel - Vehicles Without: Convertible Top
Rear Quarter Trim Panel - Vehicles Without: Convertible Top (76.13.73)
Removal
1. Remove the rear seat backrest.
2. NOTE: Release the forward edge first.
Remove the scuff plate trim panel.
-
Release from the 4 clips.
3. Release the rear safety belt lower anchor.
-
Remove and discard the Torx bolt.
4. Remove the rear quarter trim panel.
-
Remove the 3 Torx bolts.
-
Release from the 4 clips.
-
Release the safety belt from the trim panel.
Installation
1. Install the rear quarter trim panel.
-
Position the safety belt through the trim panel.
-
Secure with the clips.
-
Tighten the Torx bolts to 3 Nm (2.2 lb.ft).
2. Secure the rear safety belt lower anchor.
-
Tighten the new Torx bolt to 45 Nm (33 lb.ft).
3. Install the scuff plate trim panel.