XK (X150) V8-4.2L (2008)
-
Secure the Velcro strap.
-
Attach the clips.
3. Secure the front seat backrest cover lower tension straps.
4. Install the front seat cushion outer trim panel.
-
Connect the electrical connector.
-
Secure in the clips.
5. Secure the front seat cushion outer trim panel.
-
Tighten the Torx screws.
6. Install the front seat hinge covers.
-
Attach the hinge cover retainers.
-
Tighten the Torx screws.
7. Install the front seat.
8. Connect the battery ground cable and install the cover.