XK (X150) V8-4.2L (2008)
Brake Pedal Assy: Service and Repair
Brake Pedal and Bracket
Removal
1. Remove the cover and disconnect the battery ground cable.
2. Remove the instrument panel.
3. Remove the windshield wiper arms.
4. Remove the throttle pedal assembly.
> Remove the 3 Torx screws.
> Disconnect the electrical connector.
5. Release the brake switch.
> Rotate clockwise approximately 30 degrees.
6. Release the brake booster.
> Remove the brake pedal clevis pin.
> Remove the 4 nuts.
7. Remove the nuts from the brake pedal bracket.
> Remove the 5 nuts.