XK (X150) V8-4.2L (2008)
Air Filter Element: Service and Repair
Air Cleaner Element (19.10.08)
Removal
1. Raise and support the vehicle.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
2. Remove the LH front wheel and tire.
3. Release the front of the fender splash shield.
-
Remove the 11 Torx bolts.
-
Tie the splash shield aside.
4. Remove the air cleaner housing.
-
Remove the 2 screws.
5. Remove the air cleaner element.
Installation
1. Install the air cleaner element.
-
Clean the components.
2. Install the air cleaner housing.
-
Tighten the Torx screws.
3. Install the fender splash shield.
-
Tighten the Torx bolts.
4. Install the wheel and tire.