XK (X150) V8-4.2L (2008)
Muffler: Service and Repair
Muffler and Tailpipe (30.10.52)
Muffler and Tailpipe (30.10.52)
Removal
WARNING: Observe due care when working near a hot exhaust system.
1. Remove the cover and disconnect the battery ground cable.
2. Raise and support the vehicle.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
3. With assistance, remove the rear muffler.
-
Release the 2 clamps.
-
Release the 2 exhaust hangers.
Installation
1. Install the rear muffler.
-
Tighten the nuts to 50 Nm (37 lb.ft).
-
Attach the exhaust hangers.
2. Connect the battery ground cable and install the cover.