XK (X150) V8-4.2L (2008)
Fog/Driving Lamp: Adjustments
Front Fog Lamp Adjustment
1. Align the beam setting equipment to one fog lamp.
2. Check the fog lamp beam alignment.
NOTE: The fog lamp beam should be set at 1.2% below the horizontal and parallel.
3. Turn the steering on to full lock for access.
4. Release the front of the fender splash shield.
-
Remove the 7 Torx bolts.
-
Tie the splash shield aside.
NOTE: Wheel shown removed for clarity.
5. Adjust the fog lamp using the thumb wheel.
6. Install the fender splash shield.
-
Tighten the Torx bolts.
7. To adjust the second fog lamp, repeat the above procedure.