XK (X150) V8-4.2L (2008)
Installation
1. Install the parking aid module.
-
Connect the electrical connectors.
-
Tighten the nuts to 3 Nm (2 lb.ft).
-
Secure the electrical harness.
-
Align the acoustic pad.
2. Install the subwoofer cover.
-
Tighten the bolts to 10 Nm (7 lb.ft).
CAUTION: Make sure the carpet is correctly installed and that no foul-condition exists when the accelerator pedal is depressed.
3. Install the carpet.
-
Install the floor console side panel trim.
4. Install the cowl side trim panel.
-
Carefully align and secure the clips.
-
Secure the scuff plate trim panel.
5. Connect the battery ground cable and install the cover.