XK (X150) V8-4.2L (2008)
/v8-4.2l/Page-917003.png)
10. Remove the steering column.
^
Remove the 4 nuts.
11. NOTE: Do not disassemble further if the component is removed for access only.
Using the special tool remove the driver air bag module.
^
Rotate the steering wheel for access to slots.
^
Carefully release the 2 clips.
^
Disconnect the 3 electrical connectors.
12. NOTE: Note the fitted position.
Remove the steering wheel.
^
Disconnect the electrical connector.
^
Loosen, but do not fully remove the bolt.
^
Release the steering wheel from the spline.
^
Remove the bolt.
^
Release the electrical harness.
