XK (X150) V8-4.2L (2008)
Acceleration Sensor: Service and Repair
Rear Suspension Vertical Accelerometer
Rear Suspension Vertical Accelerometer
Removal
1. Remove the LH loadspace trim panel.
2. CAUTION: Make sure the accelerometer is not dropped as damage will be caused to the internal components.
Remove the accelerometer.
^
Remove the 2 nuts.
^
Disconnect the electrical connector.
Installation
1. Install the accelerometer.
^
Tighten the nuts to 8 Nm (6 lb.ft).
^
Connect the electrical connector.
2. Install the LH loadspace trim panel.