XK (X150) V8-4.2L SC (2007)
Antenna - Keyless Entry: Service and Repair
Keyless Vehicle Antenna
Keyless Vehicle Antenna
Removal
1. Remove the cover and disconnect the battery ground cable.
2. Remove the keyless vehicle antenna.
-
Remove the 2 Torx bolts.
-
Disconnect the electrical connector.
Installation
1. Install the keyless vehicle antenna.
-
Connect the electrical connector.
-
Tighten the Torx bolts to 3 Nm (2 lb.ft).
2. Connect the battery ground cable and install the cover.