XK (X150) V8-4.2L SC (2007)
/v8-4.2l_sc/Page-1295002.png)
Installation
1. Install the loadspace trim panel.
-
Install the clip.
2. Install the scuff plate trim panel.
-
Remove the 4 Torx bolts.
-
Tighten the Torx screws to 10 Nm (7 lb.ft).
3. Install the spare wheel and tire.
-
Install the retaining bolt.
4. Install the tool kit tray.
5. Install the loadspace floor panel.
6. Install the battery cover.
-
Install the 4 retainers.
