XK (X150) V8-4.2L SC (2007)
6. Tighten the subframe bolts.
-
Tighten the front bolts (M15) to 80 Nm plus 360 degrees.
-
Tighten the rear bolts (M12) to 80 Nm plus 270 degrees.
7. With assistance, install the A-frame.
-
Tighten the bolts to 55 Nm (40 lb.ft).
8. Install the engine undershield.
9. Install the radiator deflector.
10. Lower the engine onto its mounts.
-
Tighten the new nuts to 63 Nm (46 lb.ft).
-
Remove the special tools.
11. Remove and discard the 2 cable ties.
12. Install the lower suspension arms.
13. Install the throttle body.
14. Connect the battery ground cable and install the cover.
15. Using only four-wheel alignment equipment approved by Jaguar, check the wheel alignment, and adjust if required.