jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Interior - Cargo Cover Trim is Loose|Page 5331 > < Interior - Cargo Cover Trim is Loose|Page 5325
Page 1
background image

Cargo Cover: Customer Interest
Interior - Cargo Cover Trim is Loose

NUMBER
XK501-007

MODEL
2007 XK

DATE
08 Feb 2007

SECTION: 
501-05 - INTERIOR TRIM AND ORNAMENTATION

Cargo Cover Retention

AFFECTED VEHICLE RANGE:
New XK

VIN:
B00125 to B07723

Model Year:
2007

CONDITION SUMMARY:
CARGO COVER RETENTION

Situation:
A concern may be reported that the luggage compartment cargo cover trim is loose. This condition may be caused by the retaining clamp toggles coming
loose from the body.

Action:
Should this concern be expressed, refer to the Repair Procedure detailed in this bulletin to install washers to the retaining clamp toggle assemblies.

PARTS:

C2P 14343.....Washer

Qty 4

WARRANTY:

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

Normal warranty policy and procedures apply.

REPAIR PROCEDURE

INSTALL WASHERS TO THE CARGO COVER RETAINING CLAMPS

1.

Open the trunk.

Interior - Cargo Cover Trim is Loose|Page 5331 > < Interior - Cargo Cover Trim is Loose|Page 5325