XK (X150) V8-4.2L SC (2007)
/v8-4.2l_sc/Page-1378002.png)
2. Install the rear seat backrest retaining bracket.
-
Tighten the nuts and bolts to 10 Nm (7 lb.ft).
3. Install the rear seat backrest trim panel.
-
Tighten the bolts to 10 Nm (7 lb.ft).
-
Install the clips.
4. Install the rear seat backrest.
5. Connect the battery ground cable and install the cover.
6. Connect WDS to the vehicle and configure a new module.
