XK (X150) V8-4.2L SC (2007)
8. Remove the convertible top outer material.
-
Release the convertible top material from the frame.
Installation
1. Install the convertible top outer material.
-
Secure the convertible top material to the frame.
2. Secure the front edge of the convertible top material.
-
Install the Torx screws.
3. Secure the convertible top outer material retaining straps.
-
Tighten the Torx bolts to 6 Nm (4 lb.ft).
4. Feed the tension cables through the convertible top outer material ensuring the correct routing.
-
Attach the tension cables to the convertible top frame.
-
Install new clips.
5. Secure the convertible top to the rear seal.
-
Carefully open the rear seal sufficiently to locate the convertible top outer material.
-
Attach the convertible top outer material.
-
Clamp the seal to retain the outer material.
6. Install the convertible top side seal carriers.
-
Install the rivets.
-
Attach the seal.
7. Install the convertible top front seal carriers.
-
Install the spacers.
-
Tighten the new Torx bolts to 6 Nm (4 lb.ft).
-
Attach the seal.
-
Tighten the Torx screws.
8. Install the convertible top headliner.