XK (X150) V8-4.2L SC (2007)
4. Attach the convertible top lid lift cylinder.
-
Secure with the clip.
5. Secure the convertible top lid latch and cable assembly.
-
Connect the electrical connector.
-
Secure the cables in the clips.
6. Secure the convertible top electrical connector.
-
Connect the electrical connector.
-
Secure with the clip.
7. Install the RH loadspace trim panel.
8. Connect the battery ground cable and install the cover.
9. NOTE: Support as necessary.
Close the convertible top compartment lid.
-
Raise the rear of the convertible top.