XK (X150) V8-4.2L SC (2007)
9. Remove the convertible top compartment trim panel.
-
Remove the 2 Torx bolts.
-
Release from the 8 clips.
Installation
1. Install the convertible top compartment trim panel.
-
Install and tighten the Torx screws.
-
Secure with the clips.
2. Install the convertible top compartment moulding.
-
Tighten the nuts to 4 Nm (3 lb.ft).
3. Install the convertible top compartment lid strikers.
-
Tighten the bolts to 9 Nm (7 lb.ft).
4. Install the convertible top compartment lid lift cylinder spigot.
5. Install the convertible top compartment lid pad.
-
Secure with the clips.
6. Install the convertible top compartment lid buffers.
-
Release the clips.
-
Secure in the clips.