XK (X150) V8-4.2L SC (2007)
5.
Release the convertible top tonneau seal from the vehicle body. (Figure 8)
6.
Remove the four clips.
7.
Remove the convertible top tonneau seal.
8.
Install the four clips
9.
Install the new convertible top tonneau seal.
10.
Remove tonneau support.
11.
Start and run the engine.
12.
Close the convertible top.
13.
Verify convertible top operation.
REPAIR PROCEDURE 2: FROM VIN B02335 TO B11642
FOLLOW REPAIR PROCEDURE 1 ABOVE, PERFORMING PROCEDURES:
^
VERIFYING CONVERTIBLE TOP/FENDER GAP
^
ADJUSTING CONVERTIBLE TOP/FENDER GAP
^
INSTALLING NEW CONVERTIBLE TOP TONNEAU SEAL
REPAIR PROCEDURE 3: FROM VIN B11643 TO B19420
FOLLOW REPAIR PROCEDURE 1 ABOVE, PERFORMING PROCEDURES:
^
VERIFYING CONVERTIBLE TOP/FENDER GAP
^
ADJUSTING CONVERTIBLE TOP/FENDER GAP
Disclaimer