XK (X150) V8-4.2L SC (2007)
7. Release the hydraulic cylinder.
-
Release the 2 clips.
8. CAUTION: Fluid loss is unavoidable care must be taken to protect the interior of the vehicle.
Disconnect the hydraulic cylinder lines.
-
Carefully release the 2 clips.
-
Withdraw the hydraulic lines from the cylinder, remove and discard the O-rings.
9. Remove the hydraulic cylinder.
-
Remove and discard the 3 cable ties.
-
RH hydraulic cylinder only: Disconnect the electrical connector.
Installation
1. Connect the hydraulic cylinder lines.
-
Lubricate and install the new O-rings.
-
Connect the hydraulic lines to the cylinder.
-
Secure with the clips.
2. Install the hydraulic cylinder.
-
RH hydraulic cylinder only: Connect the electrical connector.
-
Secure with cable ties.
-
Secure with the clips.