XK (X150) V8-4.2L SC (2007)
Splash Guard: Service and Repair
Radiator Splash Shield
Radiator Splash Shield (76.22.90)
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on a four-post lift.
Raise and support the vehicle.
2. NOTE: Note the fitted position of the washers.
Remove the radiator splash shield.
-
Remove the 21 Torx bolts.
-
Remove the 2 screws.
3. NOTE: Do not disassemble further if the component is removed for access only.
Remove the 13 clips.
4. Remove the 2 air deflectors.
-
Release the 2 clips.
Installation
1. Install the air deflectors.
-
Carefully secure the clips.
2. Install the clips.
3. Install the radiator splash shield.
-
Tighten the Torx bolts.
-
Tighten the screws.