XK (X150) V8-4.2L SC (2007)
4.
Verify that there is no gap between the convertible top and both fenders by using a piece of paper. (Figure 5)
^
If there is a gap present, adjustment of the fender will be necessary as per ADJUSTING CONVERTIBLE TOP/FENDER GAP.
^
If there is no gap present continue to INSTALLING NEW CONVERTIBLE TOP TONNEAU SEAL.
ADJUSTING CONVERTIBLE TOP/FENDER GAP
1.
Start and run engine.
CAUTION:
Support the convertible top tonneau as necessary.
2.
Fold convertible top back into luggage compartment, but leave tonneau vertical. (Figure 1)
3.
Shut engine off.
CAUTION:
Be sure to use only moderate pressure while pulling fender upwards.