XK (X150) V8-4.2L SC (2007)
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the RH rear wheel and tire.
3. Release the parking brake cable tension.
4. Disconnect the RH parking brake cable.
> Release the 2 clips.
5. NOTE: Note the fitted position.
Disconnect and release the parking brake cable from the caliper.
> Release the 2 clips.
> Remove the LH parking brake cable.
Installation
1. NOTE: Align to the position noted on removal.
Install the parking brake cable.
> Carefully secure the clips.
2. Connect the parking brake cable.
> Carefully secure the clips.
3. Install the wheel and tire.