XK (X150) V8-4.2L SC (2007)
> Remove the brake pedal clevis pin.
> Remove the 4 nuts.
6. Remove and discard the gasket.
Installation
1. Install new gaskets.
2. Install the brake booster.
> Tighten the nuts to 25 Nm (18 lb.ft).
> Install the brake pedal clevis pin.
3. Connect the vacuum hose.
4. Install the brake switch.
5. Install the driver's side footwell trim panel.
> Carefully align and secure the clips.
6. Install the brake master cylinder.