XK (X150) V8-4.2L SC (2007)
Vehicle Speed Sensor/Transducer - Cruise Control: Adjustments
Speed Control Sensor Adjustment
Special Service Tools
1. Raise and support the vehicle.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
2. Remove the front bumper cover.
3. Position the vehicle on a smooth level surface and settle the suspension.
CAUTION: Drive the vehicle on to a flat, level surface.
4. Using the special tool, check the speed sensor is level, (± 0.5 degrees).
5. Using the special tool, set the speed control sensor.
-
Rotate the vertical adjuster.
-
Adjust using an internal Torx Bit.
NOTE:
-
The speed sensor has no mechanical horizontal adjustment.
-
Do not release the lock nut.
6. Install the front bumper cover.