2007 Jaguar XK V8-42L SC Radiator Service and Repair Information
Installation
1. Install the cooling fan.
> Secure in the retainers.
> Tighten the bolts.
2. Install the radiator rubber mountings
3. Install the radiator assembly.
> Protect the elements from damage.
> Lift the radiator onto its mountings.
> Connect the electrical connectors.
4. Attach the power steering fluid cooler.
> Tighten the bolts to 7 Nm (5 lb.ft).
5. Install the auxiliary coolant pump.
> Secure in the rubber mounting.
> Connect the electrical connector.
6. Connect the transmission cooler lines.
> Clean the components.
> Install new O-ring seals.
> Tighten the unions to 20 Nm (15 lb.ft).
7. Connect the radiator lower hose.
> Secure with the clip.
8. Connect the radiator upper hose.
> Secure with the clip.
9. Install the radiator upper mountings.
> Tighten the Torx bolts to 23 Nm (17 lb.ft).
10. Install the supercharger radiator.
11. Install the fan cowl.
> Secure with the clips.
12. Install the intake air resonator.
13. Connect the battery ground cable and install the cover.
14. Check and top-up the transmission fluid level.