XK (X150) V8-4.2L SC (2007)
Access Cover: Service and Repair
Engine Cover (76.11.35)
Removal
CAUTION: Correct installation of the oil filler cap can be obtained by tightening the cap until an audible click is heard.
NOTE: Naturally aspirated engine shown, supercharged engine is similar.
1. Remove the cover and disconnect the battery ground cable.
2. Open the hood.
3. Remove the oil filler cap.
4. Remove the engine cover.
-
Release the 4 clips.
Installation
1. Install the engine cover.
-
Position and secure the clips.
2. CAUTION: Correct installation of the oil filler cap can be obtained by tightening the cap until an audible click is heard.
Install the oil filler cap.
3. Close the hood.
4. Connect the battery ground cable and install the cover.