XK (X150) V8-4.2L SC (2007)
Oil Pan: Service and Repair
Oil Pan
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the engine undershield.
3. Remove the oil pan drain plug.
> Position a container to collect the fluid.
> Discard the oil pan drain plug seal.
4. Remove the oil pan.
> Position a container to collect the oil spillage.
> Remove the 17 bolts.
> Remove and discard the gasket.
Installation
1. Install the oil pan.
> Clean the components.
> Install the new gasket.
> Install the bolts, but do not tighten fully at this stage.
2. Evenly and progressively tighten the bolts in the sequence shown to 12 Nm (9 lb.ft).