Service and Repair for XK (X150) V8-42L SC Active Exhaust System Vacuum Pump - Page 1686
-
Remove the 2 bolts.
-
Disconnect the vacuum line.
7. Remove the exhaust sound enhancement solenoid.
-
Remove the bolt.
-
Disconnect the 2 vacuum lines.
Installation
1. Install the exhaust sound enhancement solenoid.
-
Tighten the bolt.
-
Connect the vacuum lines.
2. Install the exhaust sound enhancement vacuum reservoir.
-
Tighten the bolts to 7 Nm (5 lb.ft).
-
Connect the vacuum line.
3. Install the exhaust sound enhancement vacuum pump.
-
Connect the vacuum line.
-
Secure with the rubber mountings.
4. Install the exhaust sound enhancement vacuum pump assembly.
-
Connect the vacuum line.
-
Tighten the nuts to 7 Nm (5 lb.ft).
-
Tighten the bolt to 7 Nm (5 lb.ft)
-
Connect the electrical connectors.
-
Attach the wiring harness.
5. Secure the fender splash shield.
-
Tighten the Torx bolts.
6. Install the wheel and tire.