XK (X150) V8-4.2L SC (2007)
/v8-4.2l_sc/Page-446003.png)
8. Remove the exhaust manifold.
> Remove and discard the 8 bolts.
> Remove the 8 spacers.
9. Remove and discard the exhaust manifold gasket.
> Remove the bolt.
Installation
1. Install the exhaust manifold gasket.
> Clean the component mating faces.
> Tighten the bolt to 50 Nm (37 lb.ft).
2. Install the exhaust manifold.
> Clean the component mating faces.
> Install the spacers.
> Evenly and progressively, tighten the new bolts in the sequence shown, to 24 Nm (18 lb ft).
