XK (X150) V8-4.2L SC (2007)
/v8-4.2l_sc/Page-446004.png)
3. Install the heat shield.
> Tighten the screws.
4. Install the RH engine mount.
5. Install the exhaust system.
6. Attach the EGR valve to exhaust manifold pipe.
> Clean the component mating faces.
> Install a new gasket.
> Tighten the nuts to 25 Nm (18 lb.ft).
7. Install the engine cover.
8. Connect the battery ground cable and install the cover.
