XK (X150) V8-4.2L SC (2007)
Instrument Panel Control Module: All Technical Service Bulletins
Steering - Column Tilt/Reach Inop/Heavy Steering
MODEL
2007 XK
DATE
Feb 2007
NUMBER
JTB00011
SECTION: 211-00- STEERING SYSTEM GENERAL INFORMATION
Steering Column Tilt/Reach Inoperative and/or Heavy Steering
AFFECTED VEHICLE RANGE:
New XK
VIN:
B00652 to B11886
Model Year:
2007
CONDITION SUMMARY:
STEERING COLUMN TILT/REACH MECHANISM INOPERATIVE AND/OR HEAVY STEERING
Situation:
A concern may be reported that the steering column tilt/reach mechanism is inoperative or that the steering is heavy. Additional data has been provided
in the latest Instrument Cluster (IC) control module configuration to resolve these concerns.
Action:
Should a concern be discovered, refer to the Repair Procedure detailed in this bulletin to reconfigure the IC control module using Integrated Diagnostic
System (IDS).
PARTS:
No parts required. Information purposes only.
TOOLS:
IDS DVD104 with Patch File 2 (or later) software installed
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
Normal warranty policy and procedures apply.
REPAIR PROCEDURE
RECONFIGURE INSTRUMENT CLUSTER CONTROL MODULE
NOTE: