XK (X150) V8-4.2L SC (2007)
/v8-4.2l_sc/Page-931003.png)
16. Disconnect the fuel temperature sensor electrical connector.
17. Disconnect the throttle position (TP) sensor electrical connector.
18. Disconnect the exhaust gas recirculation (EGR) valve electrical connector.
19. Disconnect the purge control valve (PCV) electrical connector.
-
Release the wiring harness.
20. Remove the ignition coil-on-plug cover.
-
Release from the 2 clips.
-
Repeat the above procedure for the RH side.
NOTE: LH illustration shown, RH is similar.
