XK (X150) V8-4.2L SC (2007)
21. Disconnect the ignition coil-on-plug electrical connector.
-
Repeat the above procedure for the remaining 7 coil-on- plugs.
NOTE: LH illustration shown, RH is similar.
22. Release the coil-on-plug wiring harness.
-
Release the 3 clips.
-
Repeat the above procedure for the RH side.
NOTE: LH illustration shown, RH is similar.
23. Release the engine wiring harness from the valve cover.
-
Release the 3 clips.
-
Repeat the above procedure for the RH side.
NOTE: LH illustration shown, RH is similar.
24. Disconnect the LH camshaft position CMP sensor electrical connector.
-
Slide the red connector latch to one side.