XK (X150) V8-4.2L SC (2007)
41. Release and disconnect the 2 RH HO2S electrical connectors.
-
Release the clip.
42. Disconnect the crankshaft position (CKP) sensor electrical connector.
NOTE: Clean the components general area prior to dismantling.
43. Disconnect the starter motor battery positive and generator cables.
-
Release the cover.
-
Remove the nut.
44. Disconnect the starter motor solenoid electrical connector.
-
Remove and discard the nut.
45. Disconnect the engine oil pressure (EOP) sensor electrical connector.