XK (X150) V8-4.2L SC (2007)
Impact Sensor: Service and Repair
Front Impact Severity Sensor
Front Impact Severity Sensor
Removal
NOTE: The LH front impact severity sensor is illustrated, removal of the RH sensor is a similar procedure.
1. Open the hood.
2. Remove the fan cowl.
-
Remove the 15 clips.
3. Remove the front impact severity sensor.
-
Remove the 2 bolts.
-
Disconnect the electrical connector.
Installation
1. Install the front impact severity sensor.
-
Connect the electrical connector.
-
Tighten the bolts to 8 Nm (6 lb.ft).
2. Install the fan cowl.
-
Secure with the clips.