XK (X150) V8-4.2L SC (2007)
/v8-4.2l_sc/Page-1147002.png)
1.
Refer to GTR Workshop Manual, Section: 501-20B (76.73.60) and install a new front passenger seat Occupant classification sensor kit.
CAUTION:
A Midtronics PSC-550 Vehicle Power Supply must be connected to the vehicle battery during diagnosis.
2.
Connect the Midtronics PSC-550 power supply to the vehicle battery.
3.
Connect IDS to the vehicle and begin a new diagnostic session, by entering the correct VIN for the current vehicle.
4.
Perform the procedure for Seat Cover Replacement after installation of the OCS kit is finalized.
5.
When the task is completed, exit the current session.
6.
Disconnect IDS and the battery power supply.
Disclaimer
