XK (X150) V8-4.2L SC (2007)
8. Release the seat module bracket.
-
Disconnect the 4 electrical connectors.
-
Release the 3 wiring harness clips.
-
Remove and discard the cable tie.
-
Remove the 4 Torx bolts.
9. Release the occupant classification module from the seat module bracket.
-
Remove the 2 Torx screws.
10. Release the harness assembly from the seat module bracket.
-
Release the 7 wiring harness clips.
-
Release the 4 electrical connectors.
-
Disconnect the 4 electrical connectors.