XK (X150) V8-4.2L SC (2007)
12. CAUTION: Make sure the caster adjustment bolt does not rotate while the lock nut is being tightened.
Tighten the caster adjustment cam bolt nut.
^
Tighten the nut and bolt to 175 Nm (129 lb.ft).
13. CAUTION: Adjustments made to the camber setting will affect the front toe setting. Therefore, the camber and toe may need to be
adjusted at the same time.
NOTE: LH illustration shown, RH is similar.
To adjust the camber, loosen the rear lower arm lock nuts.
14. NOTE: LH illustration shown, RH is similar.
Rotate the camber adjustment cam bolt.
15. CAUTION: Make sure the camber adjustment bolt does not rotate while the lock nut is being tightened.
Tighten the camber adjustment cam bolt nut.
^
Tighten the nut and bolt to 175 Nm (129 lb.ft).
16. NOTE: LH illustration shown, RH is similar.
To adjust, loosen the tie rod end lock nuts.