jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Without Supercharger|Page 3811 > < Without Supercharger|Page 3809
Page 1
background image

Power Steering Pump: Service and Repair
With Supercharger

Power Steering Pump - Vehicles With: Supercharger 

Removal 

1. Remove the cover and disconnect the battery ground cable.

2. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. 

Raise and support the vehicle.

3. Remove the LH front wheel and tire.
4. Remove the accessory drive belt. 
5. Release the air conditioning compressor.

^

Remove the 3 bolts.

6. WARNING: Fluid loss is unavoidable, use absorbent cloth or a container to collect the fluid. 

CAUTION: Always plug any open connections to prevent contamination. 

Disconnect the low pressure line from the power steering pump.

^

Release the clip.

7. CAUTION: Always plug any open connections to prevent contamination. 

Disconnect the high pressure line from the power steering pump.

^

Remove and discard the O-ring seal.

8. Remove the power steering pump.

^

Remove the 4 bolts.

Installation 

1. Install the power steering pump.

^

Tighten the bolts to 25 Nm (18 lb.ft).

Without Supercharger|Page 3811 > < Without Supercharger|Page 3809